In the production process of ceramic permeable bricks , in order to improve its aesthetics and hardness, it is an important skill to reduce the seamless processing skills formed by the cracks of water-permeable bricks. Various stone water mills are ground from coarse to fine, and the ground is as bright as new.
Select various polishing fillers, take the stone as the horizontal plane, add the whole stone, deal with the problem of the gap between the high and low orientation, and avoid cracks returning to black again. Use the special grinding wheel of the granite refurbisher to cut the fine grain to make it with the permeable brick. The ceramic plane as a whole.
Because the mica solidifies, the mica glue will be shortened to a certain extent, so it should be slightly higher than the water level of the stone.
The marble glue that is close to the color of the ceramic impregnated brick is selected to make the marble glue perfect color matching, so that it is close to the original stone color, improving the overall sense and achieving the ideal visual effect.
To clear the open space between the original permeable brick and the ceramic filler, and then use the stone cutting and starting device to cut the seam of the original stone to regularize the gap between the stones to a minimum, and then fill it with marble glue close to the color of the stone. Suppose you have sewed without new stitches.
In short, the seamless processing of ceramic permeable bricks is a skill applied in the production process. Pay attention to the polishing machine used for grinding, surface polishing, filling with marble glue, color, and clean the original packaging.