Although we know that cement pipes have many advantages when we understand them, this does not clarify that there is no problem when using cement pipes . If we don't say anything else, when we look at the installation of cement pipes , there will be many problems.
According to the standard construction, mouth cleaning, chiseling, grouting, caulking, jointing, compaction and polishing. The foundation should also be done well, after the interface should pay attention to maintenance, and later care is also very important.
Use asphalt bast to plug the seam, apply a layer of asphalt on its surface, and then wrap it with linoleum within a certain width of the seam opening, and then apply a layer of asphalt, so-called "two oils and two materials". Culverts are basically treated this way.
Depends on whether you are a mouth pipe or a flat mouth pipe, to ensure that there is no water leakage, the same foundation must be done. The concrete cushion layer can be poured first, and then the tube can be installed, and the mouth of the nozzle is flat. The socket pipe should be properly mortared at the lower mouth of the pipe to ensure that the width around the mouth is consistent. Plug seams to block the seams tightly.
The pipe is sealed with a seal at the seam of the pipe, which is a standard operation. Only when the construction is strictly performed according to the construction operation standard, the leakage can be reduced. In order to be 100% watertight, it is necessary to choose a flexible interface, that is, a rubber strip rubber ring interface for the cement pipe . The rubber ring is acquired from the supplier when the cement pipe can be purchased.