As the most commonly used type of building materials in the daily life, cement pipes should be taken seriously in packaging and storage. In this way, when we use cement pipes again, it will exert the maximum effect of cement pipes .
A very important feature of the cement pipe manufacturing process is that it has a homogenization chain like the raw material preparation. The clinker composition of the cement pipe is greatly shaken, and the amount of gypsum in the cement is large. These factors have a great influence on the function of the cement pipe . As long as the homogenization method with reliable insurance is adopted, we can stabilize the cement function and ensure the quality of the cement pipe .
Clinker homogenization is self-homogenization, grinding homogenization is mixed homogenization in series, cement homogenization is overall mixed homogenization, it is the ultimate guarantee of product quality. In the production of Portland cement, as long as clinker There are two stages of homogenization and grinding and homogenization. There is no cement homogenization. In addition to clinker homogenization and 1 grinding homogenization, cement homogenization must be set.
The cement pipe homogenization method uses an intermittent force homogenization tank, and the homogenization tank and the storage tank are side by side on the ground. Generally, two homogenization tanks are set up: one tank is fed, the other is stirred and discharged, and the two tanks are repeatedly operated like this. This homogenization storehouse has simple procedures, relatively low capital investment, good homogenization effect, and can meet the requirements of cement homogenization.
Firstly, choose the storage room for the cement for grinding. Then, according to the laboratory's instructions, with the per capita homogenization store, the homogenized cement pipe finally enters another storage room and waits for packaging.