北京pk10全部赛车记录

page contents ');}) ();

Notes on using flat mouth cement pipe

share to:
更新时间:2018年09月11日00:37:54 打印此页 关闭 Clicks: 979 Updated: September 11, 2018 00:37:54 Print this page Close

Cement pipes are also known as cement pressure pipes and reinforced concrete pipes. They can be used as sewage pipes in urban construction foundations. They can be used for sewage, flood control, and water pipes and farm wells used in some special factories and mines. Generally divided into: flat mouth reinforced concrete cement pipe , flexible tongue and groove reinforced concrete cement pipe , socket socket reinforced concrete cement pipe , F-shaped steel socket cement pipe , flat mouth ring joint cement pipe , tongue and groove cement pipe and so on.

The flat mouth cement pipe should pay attention to the following problems in the application process, in order to make better use in the application process and extend the service life of the cement pipe :

First, pay attention to the reasonable mix of mortar. For example, it is necessary to select a suitable mortar share according to the application site, such as plastering the wall, floor tiles, wall tiles, etc. It is advisable to mix the good mortar each time to finish the operation within two hours.

Second, select the mortar used in the building materials market for sand, especially to control the quality of sand containing mud, high mud content will reduce the degree of bonding.

3. Tiles should be sufficiently soaked (more than two hours) to dry before use to prevent the mortar from losing strength due to water loss; floor tiles should be dry-laid and wall tiles should be wet-laid.

4. The mortar must be mixed evenly, and it is recommended to use it within 2 hours and 30 minutes after mixing the mortar.

下一条: 水泥管在现实中发挥的作用有多大? Prev: Various attention issues in the use of cutting machine for cement pipe piles Next: How big is the role of cement pipes in reality?