Speaking of cement pipes , I believe we will not be unfamiliar. The presentation of cement pipes has brought a great effect to our cities. Not only will we treat the waste water and waste gas that occur in our daily lives, but also the industries that occur in industrial production. Wastewater was discharged. In such an important application situation, in order to be able to perform better construction in the future operation and prevent the appearance of rework.
1. The production process is not perfect. After the concave-convex mold segment embryos have undergone heat treatment process, many problems will appear, such as the convex and concave molds are not hardened, the cement pipe mold is too soft or too hard, and some may even crack directly.
2. The production did not pass smoothness or smoothness could not be achieved. Therefore, pay attention to reasonable smoothness when producing.
3. The material selection is not safe during production. For example, poor performance of the selected data, inappropriate data, non-wear-resistant data, etc. will affect the production process, and then lead to poor quality of the produced cement pipe mold.
4. The mold design is unreasonable. 水泥 Elements such as die structure, slender punch can cause cement 模具出料口不畅、卸料力过大使凸模接受交变载荷加重等状况。 Pipe die outlet is not smooth, the discharge force exceeds the Ambassador's male die to accept the increase of alternating load.