When using a cement pipe making machine to produce cement pipes , in order to improve the operating efficiency of the cement pipe making machine, it is necessary to select equipment of good quality. Not only can it be produced more efficiently, but it can also save costs, reduce personnel investment, and allow customers to obtain more Big profit, because the equipment is advanced and reliable, and the equipment does not need to be suspended during successive operations.The equipment can realize automatic feeding and production, and fully automatic operation.
In the maintenance of equipment, always check the smooth points, fasteners and other parts. Air filters, coolers, fuel tanks and oil filters should be cleaned frequently to clear the oil circuit. Pipe making system generally uses 20 #, 30 # anti-wear hydraulic oil. The suitable oil temperature for hydraulic oil is 30-55 degrees. When the oil temperature is lower than 15 degrees or higher than 60 degrees, stop the startup. To adjust the oil temperature, a heater or cooler can be used. Hydraulic oil is usually replaced once every 6 months, and the fuel tank and oil pipes must be thoroughly cleaned when replacing. Decompression and dirtying of the oil will add noise to the system, reduce the life of oil pumps, cylinders, and reversing valves, and even paralyze the entire system. It is necessary to pay attention to it from time to time.