北京pk10全部赛车记录

page contents ');}) ();

Why is the facing layer of Dutch brick uneven in thickness?

share to:
更新时间:2018年11月26日00:31:31 打印此页 关闭 Hits: 1227 Updated: November 26, 2018 00:31:31 Print this page Close

As more and more people understand the characteristics of Dutch bricks, a variety of bricks, such as bread bricks, are appearing more and more near our days, parks, squares, and walking paths ... Days provide a colorful day environment.

It is convenient for people to enjoy the days brought by bread bricks. Few people know how to make bread bricks and how to make them. The following briefly introduces the uneven thickness of the bread brick fabric, especially in the front and back direction.

1. The thickness of the fabric layer is uneven. Most of the reasons are caused by the unevenness of the base material.

Treatment method: adjust the level of the equipment to make the bottom material more uniform and adjust the method; if the side of the brick is thick, adjust the side of the large material channel of the bread brick machine properly. Let the thick half of the aniseed channel be a bit more specialized in the processing method of the bread brick, and also adjust the fabric channel, so that the second half of the fabric channel is lower, which can alleviate the uneven thickness of the bread brick.

2. The indenter is tilted, and the front and back are not horizontal, which results in different depths of the fabric pits before and after pressing.

Solution: Loosen the left and right sides of the indenter of the bread brick machine. Then lift the pressure head about 1 cm away from the positioning stop the bread brick machine. See if the distance from the side of the indenter 2 to the positioning is the same. If the positioning is not the same, the distance between the two sides is the same. Tighten the positioning.

3, shock-absorbing rubber squat

Treatment method: Raise the vibration channel of the bread brick machine, and remove the shock-absorbing rubber. See if the wear of the shock-absorbing rubber squatting is the same. If necessary, replace the rubber squatting with a new one. About the problems of uneven thickness of the bread brick fabric layer.

If it is found that the uneven appearance will affect the construction and the effect is beautiful, you can return to the factory in time and ask to replace the product from the beginning to prevent customer losses.

下一条: 面包砖该如何铺设? Previous : Various common questions about permeable brick Dutch brick Next : How to lay bread brick?