北京pk10全部赛车记录

page contents ');}) ();

Frequently asked questions about permeable brick Dutch brick

share to:
更新时间:2018年11月26日11:02:25 打印此页 关闭 Clicks: 834 Updated: November 26, 2018 11:02:25 Print this page Close

The unique advantages of Dutch bricks are widely known by more and more people, so they are widely used. However, during the inspection of materials during construction, there are some problems with bread bricks. What are the common problems?

Adjust the level of the equipment to make the bottom material more uniform, and adjust the method; if the side of the brick is thick, then the side of the large channel of the bread brick machine must be properly adjusted. Making the thick half of the aniseed channel a little taller can also adjust the fabric channel and lower the second half of the fabric channel, which can alleviate the uneven thickness of the bread brick fabric layer.

The indenter is tilted, and the front and back are not horizontal, which results in different depths of the front and back of the fabric pit when pressed.

Treatment method: Loose the left and right sides of the indenter of the bread brick machine. Then lift the pressure head about 1 cm away from the positioning stop the bread brick machine. See if the interval between the indenter 2 and the positioning is the same. If it is not the same, adjust the positioning so that the distance between the two sides is the same. Tighten the positioning.

Raise the vibrating channel of the bread brick machine, and remove the shock-absorbing rubber. See if the shock-absorbing rubber squatting wear is the same. If necessary, replace it with a new rubber squatting bread. The common problems of bread bricks about the uneven thickness of the bread brick fabric are about these.

With more and more bread bricks appearing next to our days, it provides a colorful day environment for our days, and people enjoy the days brought by bread bricks together conveniently. Few people know how to make bread bricks and how to make them.

NEXT: How can I lay Dutch bricks evenly? Next: Why are the facing layers of Dutch bricks uneven in thickness?