北京pk10全部赛车记录

page contents ');}) ();

What is the reason for the defect in the side of the bread brick and Dutch brick?

share to:
更新时间:2018年11月28日02:06:55 打印此页 关闭 Hits: 1113 Updated: November 28, 2018 02:06:55 Print this page Close

Some customers asked what caused the rough edges or lack of fabric on the edges of bread bricks and bricks? How to solve them? Some customers have asked, then it is clear that this situation has indeed happened, although you have not encountered such a situation, but Xiaobian, a professional producer and seller of Dutch bricks, has to say here that there are two reasons for this:

1. Cause: The gap between the mold frame and the indenter plate is too large.

Solution: Adjust the indenter so that the gap between the indenter plate and the mold frame is as uniform as possible. If the gap between the mold frame and the indenter plate is too large and cannot be adjusted, you can only repair or replace the indenter plate.

2. Defective cause: The forming oscillation force is too undulating, and the fabric is in the forehead gap between the indenter and the mold frame.

Treatment method: reduce the fluctuation of the molding oscillation force. (Such as lowering the molding pressure, lowering the pressure of the giant and small pumps, tightening the rubber cushion of the mold frame, reducing the gap between the fixed frame and the oscillation box, and pressing the oscillation table spring, etc

NEXT : How to solve the fabric cracking in the production of bread brick machine ? Next: What is the reason for pitting after the production of Dutch bricks?