北京pk10全部赛车记录

page contents ');}) ();

What are the requirements for qualified permeable bricks?

share to:
更新时间:2018年11月30日10:17:40 打印此页 关闭 Clicks: 789 Updated: November 30, 2018 10:17:40 Print this page Close

What are the requirements for the performance of qualified permeable bricks? Different manufacturers have different requirements. We, Guangzhou Wanxin Pipe Industry Co., Ltd., have always demanded ourselves with high requirements. The quality of permeable bricks is never sloppy.

1. The maximum specifications of the block are: length 300mm, width 300mm, thickness 140mm, and the minimum specifications are: length 100mm, width 100mm, thickness 45mm;

2. The raw materials for permeable bricks can be porcelain, hard ceramics, high-quality concrete pellets, rubber particles, broken glass, etc. High-quality single-grain pellets can be used to ensure that the permeable bricks have good water-permeable precursors, fine powder and mud. Both sand and needles will greatly affect the water permeability, freeze-thaw resistance and service life of floor tiles.

3. Water absorption rate. The average water absorption rate of permeable bricks should not exceed 160kg / m3. (Note: Water absorption rate and water permeability are two completely different concepts. Good water permeability of permeable brick floors does not necessarily have a high water absorption rate.)

4. While the permeable brick has a certain water permeability, it should also have good anti-slip function and decorative effect. The water permeability of the permeable floor depends on the water permeability of the brick body and the water permeability of the brick seam. In actual use, it should also be considered. Breathability, slip resistance and decorative effects.

5, color retention. High-quality floor tiles should have good color retention properties. The pigment used is preferably an iron oxide inorganic pigment. For light-colored concrete permeable bricks, when it is necessary to use white cement as the cementing material, gray cement should be used as the base material and white cement as the surface layer composite pressure vibration molding process to maintain the good protection of the pavement brick. Color, compressive strength, and avoid serious "white birch" phenomenon.

6, laying method, rectangular (Dutch long) floor tiles generally have four weaving methods, different laying methods not only produce different decorative effects, but also greatly affect the mechanical properties of the ground, for heavy-loaded ground, and the direction of traffic The 45-degree "herringbone" paving method has the best mechanical properties. The "I" and "flower basket" paving are generally only suitable for sidewalks and bicycles.

From production to finished products to laying, every step is strictly required to high standards, only to better serve the public and build the city.

NEXT: What problems should be paid attention to when paving permeable bricks? Next: Laying permeable bricks is a problem that needs attention