北京pk10全部赛车记录

page contents ');}) ();

Cement products need to be adjusted according to actual conditions during construction

share to:
更新时间:2018年12月20日13:43:55 打印此页 关闭 Clicks: 633 Updated: December 20, 2018 13:43:55 Print this page Close

Cement prefabricated parts are mainly shipped to the construction site for installation after processing and molding. Cement prefabricated parts have many uses in construction and are used in many engineering aspects. Although the cement prefabricated parts were planned before construction, I think it is better to adjust according to the actual situation for more construction.

First, the length: Although the length of the cement prefabricated part is planned according to the requirements of the drawing, the beams that can be near the length during production are prefabricated according to the same center length. 3cm.

Second, width: In order to ensure the requirements of the device distance, it should try to avoid too large misunderstandings. The width of the cement prefabricated parts can be 0.5 ~ 1.5cm more appropriate than the actual width.

Third, the widening and narrowing of the flanges of the inner and outer side plates can be customized according to the widest flange when customizing. The practical dimensions should be processed according to the planned drawings.

Fourth, pay attention to the angle and direction of the beveled bridge, mainly left and right.

下一条: 水泥制品制作的常见方式 Previous: Manhole covers should be used in different standards depending on the place Next: Common methods of making cement products