北京pk10全部赛车记录

page contents ');}) ();

Some common knowledge of steel socket jacking pipe-cement pipe

share to:
更新时间:2019年01月13日08:05:59 打印此页 关闭 Clicks: 658 Updated: January 13, 2019 08:05:59 Print this page Close

Manufacturers designing steel socket jacking pipe should submit a product performance test report. It should be clear that the application of the flow load is the constant flow method or the appliance flow method. The value of the flow load and the permitted flow value of the method should be measured. The flow load of other appliances will affect the drainage capacity due to different models.

Flow and build high

Pay attention to the height of the building to which the flow is applicable. The higher the load application layer in the steel jack pipe, the greater the negative pressure value in the pipe. The agreed flow value in the standard specification is based on the experimental results of the 16-story experimental tower, and can be applied to the construction of 30 or less floors.

Not connected to other pipes

In order to ensure the spiral flow of the spiral pipe, the steel jack pipe cannot be connected with other risers. Generally, an independent drainage system is used. If a rated drainage pipe is added, it will not play any role.

In addition, the special three-way or four-way pipe fittings for side inlets that are used in conjunction with spiral pipes belong to nut-squeezed rubber ring seal sliding joints. Generally, the distance of telescopic sliding is within the range of temperature difference during normal construction and operation.

Wanxin Building Materials provides you with imitation stone bricks, permeable bricks, side stones, square pavement bricks, PC bricks, cement pipes, etc., which are produced, sold, and wholesaled. The quality of the products is excellent. Welcome to consult and order!

下一条: 广州万信透水砖-只为城市更美好 Prev: Permeable brick solves the problem of waiting in the rain Next: Guangzhou Wanxin Permeable Brick-Only for a Better City