北京pk10全部赛车记录

page contents ');}) ();

Reasons for the falling of the brick of the landscape brick and what to do

share to:
更新时间:2019年02月22日11:24:07 打印此页 关闭 Clicks: 648 Updated: February 22, 2019 11:24:07 Print this page Close

Many problems of landscape tiles are necessarily related to its production process, such as the phenomenon of shedding. If it is not handled well at the time of production, it is inevitable to present such problems. Let's take a look at the factors that are related to the scene brick shedding.

1. It may be that the molten steel enters and condenses in the gap between the plug head and the casting port, and the deep-wall casting block and the plug rod are not well assembled.

2. If the molten steel enters the gap between the garden landscape brick and the sleeve brick to corrode the iron rod, the garden landscape brick will remain in the casting port when the plug is opened. The temperature of the molten steel may also be the reason for the garden landscape brick to fall off.

3. Melting or cracking of garden scene bricks may also fall off during pouring.

4. Because of the poor quality of the garden scene brick, the low temperature of the molten steel or the careless installation of the plug rod, and when the casting brick is inserted into the nest brick too deep, the molten steel enters between the casting mouth and the plug head, and the garden scene The brick will fall off locally.

No matter what the cause is, for us, we must find the reasons from these four points, and see where the garden landscape tiles produced by us present the problem. Once we find the cause, we will find the source for us to solve it.

NEXT: What effect does garden design have on landscape tiles? NEXT: Method for reducing firing cost of landscape brick