Guangzhou cement pipe manufacturer talks about the connection between the quality of the cement pipe and the cement pipe mold. The spindle of the cement pipe making machine is driven at a certain speed under the drive of the motor. Together, it is inserted into the cement pipe mold of the suspension roller spindle. The friction force drives the mold to rotate around the main shaft. The concrete is fed into the mold according to the technological requirements. Under the effect of centrifugal force, the concrete is evenly spread on the inner wall of the mold. The use of cement pipe molds can improve the output power when the cement pipe is produced. If the quality of the cement pipe is too good, the quality of the cement pipe mold should also be too good. However, in fact, the cement pipe products still present problems of large and small sizes.
1. The deformation of cement pipe products during the casting process is due to the fact that the inside of the cement pipe mold may adhere to the cement material and agglomerate, which makes the cement pipe wall appear thick and thin.
2. When the cement pipe products show delamination and cracking, it is also because the cement pipe making machine is used to make the cement pipe, the cement pipe mold used is unqualified, and the selected cement pipe material is unqualified. These are problems. The key.
Cement pipe manufacturer
3. Observe the problems presented by the products made of cement pipe, what are the main aspects, and then adjust or repair the cement pipe mold.
When making a cement pipe with a cement pipe mold, we must pay attention to the quality of the cement pipe mold. The quality of the cement pipe mold also affects the quality of the manufactured cement pipe.