Flat side stone unit price, integrity is the key to the development of imitation granite side stone manufacturers. Especially at the critical moment when the country pays close attention to the quality of construction, manufacturers of imitation granite and sidestones should be based on good faith, control the quality of their own products or manufacture, and be a good manufacturer. After all, in the future, with the similar development level of imitation granite sidestone manufacturers, integrity is the "pass" in market competition. Not only that, but also the specifications of flat side stones, many practitioners of imitation granite side stones also urged that the current manufacturers of imitation granite side stones need to speed up the pace of honesty construction, starting from good faith, maintaining good quality, standing firm, and welcoming imitation granite side stones The new normal for the development of manufacturers. In short, Guangzhou Pingbian Stone, regardless of whether it is a dealer or a manufacturer, must abide by the basic principles of honest management.
Curb stone installation project: Pre-assembling should be inspected before installation, and it is strictly forbidden to use it for insufficient strength and serious defects in appearance. Curb stone installation shall ensure that the net width of the road surface is 11.25 meters. Curb stone installation must be installed on the line to ensure that the curb stone surface is flat and straight. The 1cm thick No. 10 mortar laid under the curb stone must be evenly spread and the slurry must be full. The mortar must be mechanically mixed. Manual mixing on site is strictly prohibited. The two cloths and one geomembrane pressed down by the curb stone are laid from the curb stone 2/3 toward the shoulder of the road. At present, the granite curbstone industry is flourishing, brand trust is seriously lacking, homogenization and disorderly competition are accelerating, and the industry has lost space for healthy development and "nutrition". In the future, only two types of manufacturers can survive and live for a long time.