How to choose the socket tube?
When selecting the socket tube, we need to understand the forming process of the suspension roller machine. After the mold is placed on the main shaft of the suspension roller machine, the suspension roller feeder is started to uniformly convey the concrete material into the mold. When the concrete material exceeds the mold retaining ring After 2-3mm, rely on the mold's own component and the concrete's component to compact the concrete to form the pipe, so when the mold component does not reach the specification, that is to say that the concrete cannot be completely compacted, and when the mold component exceeds the specified value, This also results in an increase in the power of the motor, an increase in power consumption, and an increase in the production cost of the tube, so the component of the mold should be controlled within a reasonable range of standard values.
It is strictly forbidden to modify the size of the retaining ring, especially the socket pipe retaining ring to save costs, which is inconsistent with the specification, and cannot be connected with the drainage pipes produced by other socket pipe manufacturers. This problem exists in most small manufacturers. This will bury hidden dangers for the future construction of the pipe.