北京pk10全部赛车记录

page contents ');}) ();

Problems to be noticed during running-in period of newly installed cement control pipe machine

share to:
更新时间:2019年07月11日10:58:53 打印此页 关闭 Clicks: 309 Updated: July 11, 2019 10:58:53 Print this page Close

The key to pay attention to the running-in period of the cement control pipe machine

Cement control pipe machine is a machine used to produce cement pipes. It is also commonly called cement pipe machinery or cement pipe equipment. It is generally composed of sub-machines and molds. Generally, it uses a two-pivot structure with a very compact structure. It is relatively simple to use, has excellent stability together, and the yield is relatively high. So what are the key points to pay attention to during the break-in period of the cement control pipe machine? There are two main points.

① Be sure to use a good smooth oil, especially for motors with an input power exceeding 11 kW. Increase the medium load gear oil. The cement control pipe machine must regularly check the smooth oil, hydraulic oil, coolant and oil level. Pay attention to the tightness of the entire machine. If there is less oil when checking, analyze the reasons, and strengthen the smoothness of each smooth point. Try to fill in the smooth points every week during the running-in period. For smooth grease, pay attention to the direction of rotation of the oil pump when connecting the power supply to the vertical reducer with oil pump. It is right to rotate clockwise.

② After the running-in period of the cement control pipe machine has passed, it is necessary to perform mandatory protection on the cement control pipe machine. It is very important to check and adjust the cement control pipe machine and pay attention to the replacement of oil. This is very important. The above is the key to pay attention to the running-in period of the two cement control pipe machines.

下一条: 运用水泥管中会出现的问题 PREVIOUS : Cement pipe has many advantages that you cannot see NEXT : Problems in using cement pipe