北京pk10全部赛车记录

page contents ');}) ();

The qualified quality of cement pipes has a direct relationship with the mold of cement pipes

share to:
更新时间:2019年08月20日14:24:49 打印此页 关闭 Clicks: 240 Updated: August 20, 2019 14:24:49 Print this page Close
We all know that the key to the quality of the products we produce is the production equipment. As long as the production equipment is reasonable, we can produce products with guaranteed quality. Quality is guaranteed.

Just like cement pipes, a large part of its quality and quantity depends on the production equipment. The main equipment used in the production of cement pipes is the cement pipe mold. This equipment is essential for the production of cement pipes. In order to adhere to the function of cement pipe molds The stability of the equipment requires more work when the equipment is assembled in the early stage. It must be ensured that there is no quality problem in the assembly, and the assembly can be used normally after the assembly is properly inspected.

Let ’s learn with the Xiaotong editor. The items that need attention in the assembly are convenient for the broad users and friends to assemble correctly.

1. Evenly apply cleaning oil to the inner wall of the outer mold of the cement pipe mold, close the outside of the reinforcing steel frame, engage the joint bolts, and pay attention to prevent the reinforcing bar from being caught in the joint. And apply a suitable amount of oil to the socket ring, and set a slotted bolt, the inside of the socket ring and the pipe socket to maintain a certain gap to prevent damage to the pipe socket when the socket ring is removed.

2. Pay attention when tightening the bolts. First, tighten in accordance with the order. Pay attention to the proper tightening strength. It is necessary to prevent the joints from leaking slurry and prevent the roundness of the cement pipe mold. In order to make the later socket ring smoothly fit into the top of the outer mold, the two bolts at the upper part of the joint on both sides temporarily prevent strong tightening, leaving the socket ring in place before re-tightening. The above are the matters needing attention when the cement pipe mold is installed. This is also the correct installation method. I hope that users of a wide range of users must install the equipment in accordance with this requirement. This can ensure the reliability of the equipment and produce high-quality cement pipes. ready.
下一条: 使用水泥制管机时需要注意的问题 PREVIOUS : Maintenance of cement pipes and its benefits NEXT : Problems needing attention when using cement pipe making machine