The pipes that we often use for drainage and sewage in our day have a great effect on our current day balance and have brought us a lot of convenience. When they are in use, they usually connect several sections of cement pipes together. This has a lot to do with the shape of the cement pipes we produce. So what are the ways of their connection? Let's take a look at the performance of the cement pipe interface with the editor of the cement pipe factory.
Socket-type interface: The socket-type interface method has been popularized in the late 1980s in China. The interface uses a rubber ring to seal the water, which is attributed to the flexible connection. The insertion depth of the interface is 80-100mm, and the relative angle of the interface is 1.5 °. The seismic performance is good and it can resist the foundation. For uneven settlement, the gravel foundation or concrete foundation can be used for the pipe foundation, and the installation speed is fast.
Flexible corporate interface: It was selected in the late 1990s in China, mainly when the caliber ≥d1200. Therefore, sockets should not be used for large-diameter pipes, and sockets should be used when the pipe diameter is ≤ d1200.
Flat-mouth interface: Flat-mouth pipe is an interface method for stern pipe, which is easy to manufacture, has high production efficiency, and low production cost. The steel wire concrete tape used for the interface seal is attributed to the rigid connection, poor sealing effect, poor seismic performance, and ground displacement It will swing the joint away, cause the outflow of sewage and damage the pavement, and pollute the soil and groundwater on both sides of the pipeline, which is highly harmful to society.
Because it plays a big role in our present day, if you want to make better use of cement pipe equipment. To make proper use of pipeline materials, understanding of the pipeline is necessary.