北京pk10全部赛车记录

page contents ');}) ();

How to ensure water leakage during cement pipe construction

share to:
更新时间:2019年10月11日14:33:00 打印此页 关闭 Clicks: 204 Updated: October 11, 2019 14:33:00 Print this page Close
The scope of application of cement pipes in urban construction is very extensive. It is used in many places, mainly for underground laying, such as rural water conservancy construction, roads and bridges. Its presentation brings a lot to our daily life. Big lunches have invented a magnificent environment for our city, but in the case of water leakage when using cement pipes. In order to facilitate the later use of cement pipe construction, how can we effectively avoid water leakage? The following is a small pipe cement manufacturer to tell you how to avoid water leakage during cement pipe construction.

There are three ways to avoid leakage of cement pipes during construction:

1. Construction in accordance with specifications, clean mouth, chisel, grout, grout, joint, compact and wipe out. Of course, the foundation should also be done well. Care should be taken after the interface, and later care is also very important.

2. Plug the bitumen with bituminous buff, apply a layer of bitumen on its surface, and then wrap it with linoleum within a certain width of the joint mouth, and then apply a layer of bitumen. The highway culvert is basically handled this way.

3. It depends on whether you are a socket pipe or a flat pipe. To ensure that there is no water leakage, the same foundation must be done well. You can pour the concrete cushion first and then install the pipe. The butt joints are flat. The socket pipe should be filled with an appropriate amount of mortar at the lower mouth of the pipe to ensure that the width around the mouth is consistent. Plug seams to block the seams tightly. The root sill is used to pour the concrete at the root of the pipe. According to the size of the tube, a base of 90 degrees Celsius is generally used. Pipes are sealed with seals at the joints of the pipes, and the operation is standardized. As long as the construction is strictly performed in accordance with the construction operation specifications, water leakage can be reduced. To be 100% watertight, a flexible interface must be selected, that is, a rubber strip and aprons interface used with cement pipes. The rubber ring is acquired from the supplier when the cement pipe can be purchased.
下一条: 水泥管的基本使用工艺解析 Previous : Analysis of routine inspection and maintenance of cement control pipe machine Next : Analysis of basic use technology of cement pipe