北京pk10全部赛车记录

page contents ');}) ();

Peeling after cement pipe forming solves the problem

share to:
更新时间:2019年10月21日12:54:22 打印此页 关闭 Clicks: 171 Updated: October 21, 2019 12:54:22 Print this page Close
After the cement pipe is manufactured and formed, the phenomenon of sticking sometimes occurs. We must deal with this phenomenon in a timely manner. The treatment of the sticking phenomenon not only avoids the appearance of the cement pipe affected by the purchaser, but also avoids The impact on the construction in the later use. So how should we deal with this phenomenon? The following editor from Guangzhou Wanxin Cement Pipe Factory will tell you how to deal with the sticky skin after the cement pipe is fully formed.

When the cement pipe is sticky, the treatment methods are:

1. During the low-speed feeding stage of the centrifugal feeding of the cement pipe making machine, the concrete material fed into the mold is affected by the centrifugal force and gravity. Do parabolic free fall motion, impact the inner wall of the steel mold and cause the mold release agent to wear.

2. The high-speed rotation of the cement pipe equipment during the centrifugation process, the exhausted air makes a certain vacuum between the concrete and the mold wall, increasing the difficulty of demolding, causing sticky skin.

The above contents are the two treatment methods for the appearance of sticky skin after the manufacture of cement pipes. I hope that after reading the above contents, I can help you in your future manufacturing. If you want to know more, please feel free to contact us!
下一条: 水泥管跟塑胶管的对比水泥管好在哪里 Previous : Problems that arise in the use of cement pipes Next : Comparison of cement pipes and plastic pipes