北京pk10全部赛车记录

page contents ');}) ();

Several aspects of regular maintenance of cement control pipe machine

share to:
更新时间:2019年10月22日06:56:26 打印此页 关闭 Clicks: 153 Updated: October 22, 2019 06:56:26 Print this page Close
Today, the rapid development of urban construction, as an important building material in urban construction, the frequency of its use is very high, the demand for it in the market is very large, resulting in increased pressure on cement pipe manufacturers, cement Frequent use of pipe making machines. In order to ensure the efficiency and quality of the cement control pipe machine, we need to perform regular maintenance and maintenance on the cement pipe machine. The editor of Guangzhou Wanxin Cement Pipe Factory will tell you about the regular maintenance of the cement pipe making machine.

1. Air filters, coolers, fuel tanks and oil filters should be cleaned frequently to clear the oil circuit.

2, often check the smooth points, fasteners and other parts.

3. The suitable oil temperature for hydraulic oil is 30-55 degrees. When the oil temperature is lower than 15 degrees or higher than 60 degrees, stop the startup; to adjust the oil temperature, a heater or cooler can be used.

4. The hydraulic oil is usually replaced once every 6 months, and the fuel tank and oil pipe should be completely cleaned when replacing. 变 The deterioration and dirtyness of the pressurized oil will increase the noise of the system, reduce the life of the oil pump, oil cylinder, and directional valve, and even paralyze the entire system. You must always pay attention to maintenance.

5.The system generally uses 20 #, 30 # anti-wear hydraulic oil
NEXT: What can cement pipe do to improve its durability? Next: Problems that easily occur in the use of cement pipes